Roll over image to zoom in

1 Inch Plain Stainless Steel External Snap Ring

436.01.1

From cap screws to hitch pins, we are a master distributor for fasteners of all types. Available in inch and metric sizes, we are your single source solution. Additionally, we offer both domestic and imported options for most fastener types.

  • Allowable Corner Chamfers: 0.034 Inch
  • Allowable Corner Radii: 0.057 Inch
  • Clearance Diameter Released in Groove: 1.350 Inch
  • Edge Margin: 0.090 Inch
  • Finish: Plain
  • Gaging Diameter: 1.122 Inch
  • Groove Depth: 0.030 Inch
  • Groove Diameter: 0.940 Inch
  • Groove Diameter to Shaft Concentricity: 0.004 Inch
  • Groove Diameter Tolerance: +/-0.003
  • Groove Width: 0.046 Inch
  • Groove Width Tolerance: +0.003/-0.000
  • Hardness: HRC 44-51
  • Hole Diameter: 0.078 Inch
  • Hole Diameter Tolerance: +0.015/-0.002
  • Item: External Snap Ring
  • Lug Height: 0.167 Inch
  • Lug Height Tolerance: +/-0.004
  • Material: Stainless Steel
  • Maximum Section: 0.116 Inch
  • Maximum Section Tolerance: +/-0.005
  • Measurement: Inch
  • Minimum Section: 0.065 Inch
  • Minimum Section Tolerance: +/-0.005
  • Radial Wall Thickness: 0.065 - 0.116 Inch
  • Ring Free Diameter: 0.925 Inch
  • Ring Free Diameter Tolerance: +0.005/-0.010
  • RPM Limits: 20000 RPM
  • Shaft Diameter: 1 Inch
  • Thickness: 0.042 Inch
  • Thickness Tolerance: +/-0.002
  • Type: Stamped,Standard Duty

    • *Photographs are representational and may not be size accurate