Roll over image to zoom in

11/16 Inch Plain Stainless Steel External Snap Ring

436.01.1116

From cap screws to hitch pins, we are a master distributor for fasteners of all types. Available in inch and metric sizes, we are your single source solution. Additionally, we offer both domestic and imported options for most fastener types.

  • Allowable Corner Chamfers: 0.025 Inch
  • Allowable Corner Radii: 0.042 Inch
  • Clearance Diameter Released in Groove: 0.970 Inch
  • Edge Margin: 0.063 Inch
  • Finish: Plain
  • Gaging Diameter: 0.779 Inch
  • Groove Depth: 0.021 Inch
  • Groove Diameter: 0.646 Inch
  • Groove Diameter to Shaft Concentricity: 0.004 Inch
  • Groove Diameter Tolerance: +/-0.003
  • Groove Width: 0.046 Inch
  • Groove Width Tolerance: +0.003/-0.000
  • Hardness: HR30N 63-69.5
  • Hole Diameter: 0.052 Inch
  • Hole Diameter Tolerance: +0.010/-0.002
  • Item: External Snap Ring
  • Lug Height: 0.136 Inch
  • Lug Height Tolerance: +/-0.004
  • Material: Stainless Steel
  • Maximum Section: 0.084 Inch
  • Maximum Section Tolerance: +/-0.005
  • Measurement: Inch
  • Minimum Section: 0.048 Inch
  • Minimum Section Tolerance: +/-0.005
  • Radial Wall Thickness: 0.048 - 0.084 Inch
  • Ring Free Diameter: 0.635 Inch
  • Ring Free Diameter Tolerance: +0.005/-0.010
  • RPM Limits: 28000 RPM
  • Shaft Diameter: 11/16 Inch
  • Thickness: 0.042 Inch
  • Thickness Tolerance: +/-0.002
  • Type: Stamped,Standard Duty
  • *Photographs are representational and may not be size accurate