Roll over image to zoom in

1/2 Inch Plain Stainless Steel External Snap Ring

436.01.12

From cap screws to hitch pins, we are a master distributor for fasteners of all types. Available in inch and metric sizes, we are your single source solution. Additionally, we offer both domestic and imported options for most fastener types.

  • Allowable Corner Chamfers: 0.020 Inch
  • Allowable Corner Radii: 0.034 Inch
  • Clearance Diameter Released in Groove: 0.740 Inch
  • Edge Margin: 0.048 Inch
  • Finish: Plain
  • Gaging Diameter: 0.574 Inch
  • Groove Depth: 0.016 Inch
  • Groove Diameter: 0.468 Inch
  • Groove Diameter to Shaft Concentricity: 0.004 Inch
  • Groove Diameter Tolerance: +/-0.002
  • Groove Width: 0.039 Inch
  • Groove Width Tolerance: +0.003/-0.000
  • Hardness: HR30N 63-69.5
  • Hole Diameter: 0.047 Inch
  • Hole Diameter Tolerance: +0.010/-0.002
  • Item: External Snap Ring
  • Lug Height: 0.108 Inch
  • Lug Height Tolerance: +/-0.003
  • Material: Stainless Steel
  • Maximum Section: 0.065 Inch
  • Maximum Section Tolerance: +/-0.004
  • Measurement: Inch
  • Minimum Section: 0.040 Inch
  • Minimum Section Tolerance: +/-0.004
  • Radial Wall Thickness: 0.040 - 0.065 Inch
  • Ring Free Diameter: 0.461 Inch
  • Ring Free Diameter Tolerance: +0.002/-0.005
  • RPM Limits: 40000 RPM
  • Shaft Diameter: 1/2 Inch
  • Thickness: 0.035 Inch
  • Thickness Tolerance: +/-0.002
  • Type: Stamped,Standard Duty

    • *Photographs are representational and may not be size accurate