Roll over image to zoom in

15/16 Inch Plain Stainless Steel External Snap Ring

436.01.1516

From cap screws to hitch pins, we are a master distributor for fasteners of all types. Available in inch and metric sizes, we are your single source solution. Additionally, we offer both domestic and imported options for most fastener types.

  • Allowable Corner Chamfers: 0.033 Inch
  • Allowable Corner Radii: 0.055 Inch
  • Clearance Diameter Released in Groove: 1.290 Inch
  • Edge Margin: 0.084 Inch
  • Finish: Plain
  • Gaging Diameter: 1.054 Inch
  • Groove Depth: 0.028 Inch
  • Groove Diameter: 0.882 Inch
  • Groove Diameter to Shaft Concentricity: 0.004 Inch
  • Groove Diameter Tolerance: +/-0.003
  • Groove Width: 0.046 Inch
  • Groove Width Tolerance: +0.003/-0.000
  • Hardness: HRC 44-51
  • Hole Diameter: 0.078 Inch
  • Hole Diameter Tolerance: +0.015/-0.002
  • Item: External Snap Ring
  • Lug Height: 0.166 Inch
  • Lug Height Tolerance: +/-0.004
  • Material: Stainless Steel
  • Maximum Section: 0.110 Inch
  • Maximum Section Tolerance: +/-0.005
  • Measurement: Inch
  • Minimum Section: 0.063 Inch
  • Minimum Section Tolerance: +/-0.005
  • Radial Wall Thickness: 0.063 - 0.110 Inch
  • Ring Free Diameter: 0.867 Inch
  • Ring Free Diameter Tolerance: +0.005/-0.010
  • RPM Limits: 21500 RPM
  • Shaft Diameter: 15/16 Inch
  • Thickness: 0.042 Inch
  • Thickness Tolerance: +/-0.002
  • Type: Stamped,Standard Duty

    • *Photographs are representational and may not be size accurate