Roll over image to zoom in

1-9/16 Inch Plain Stainless Steel External Snap Ring

436.01.1916

From cap screws to hitch pins, we are a master distributor for fasteners of all types. Available in inch and metric sizes, we are your single source solution. Additionally, we offer both domestic and imported options for most fastener types.

  • Allowable Corner Chamfers: 0.049 Inch
  • Allowable Corner Radii: 0.082 Inch
  • Clearance Diameter Released in Groove: 2.010 Inch
  • Edge Margin: 0.141 Inch
  • Finish: Plain
  • Gaging Diameter: 1.740 Inch
  • Groove Depth: 0.047 Inch
  • Groove Diameter: 1.468 Inch
  • Groove Diameter to Shaft Concentricity: 0.005 Inch
  • Groove Diameter Tolerance: +/-0.005
  • Groove Width: 0.068 Inch
  • Groove Width Tolerance: +0.004/-0.000
  • Hardness: HRC 44-51
  • Hole Diameter: 0.125 Inch
  • Hole Diameter Tolerance: +0.015/-0.002
  • Item: External Snap Ring
  • Lug Height: 0.235 Inch
  • Lug Height Tolerance: +/-0.004
  • Material: Stainless Steel
  • Maximum Section: 0.172 Inch
  • Maximum Section Tolerance: +/-0.006
  • Measurement: Inch
  • Minimum Section: 0.093 Inch
  • Minimum Section Tolerance: +/-0.006
  • Radial Wall Thickness: 0.093 - 0.172 Inch
  • Ring Free Diameter: 1.446 Inch
  • Ring Free Diameter Tolerance: +0.013/-0.015
  • Shaft Diameter: 1-9/16 Inch
  • Thickness: 0.062 Inch
  • Thickness Tolerance: +/-0.003
  • Type: Stamped,Standard Duty

    • *Photographs are representational and may not be size accurate