Roll over image to zoom in

2 Inch Plain Stainless Steel External Snap Ring

436.01.2

From cap screws to hitch pins, we are a master distributor for fasteners of all types. Available in inch and metric sizes, we are your single source solution. Additionally, we offer both domestic and imported options for most fastener types.

  • Allowable Corner Chamfers: 0.057 Inch
  • Allowable Corner Radii: 0.096 Inch
  • Clearance Diameter Released in Groove: 2.486 Inch
  • Edge Margin: 0.171 Inch
  • Finish: Plain
  • Gaging Diameter: 2.205 Inch
  • Groove Depth: 0.057 Inch
  • Groove Diameter: 1.886 Inch
  • Groove Diameter to Shaft Concentricity: 0.005 Inch
  • Groove Diameter Tolerance: +/-0.005
  • Groove Width: 0.068 Inch
  • Groove Width Tolerance: +0.004/-0.000
  • Hardness: HRC 44-51
  • Hole Diameter: 0.125 Inch
  • Hole Diameter Tolerance: +0.015/-0.002
  • Item: External Snap Ring
  • Lug Height: 0.262 Inch
  • Lug Height Tolerance: +/-0.004
  • Material: Stainless Steel
  • Maximum Section: 0.204 Inch
  • Maximum Section Tolerance: +/-0.006
  • Measurement: Inch
  • Minimum Section: 0.108 Inch
  • Minimum Section Tolerance: +/-0.006
  • Radial Wall Thickness: 0.108 - 0.204 Inch
  • Ring Free Diameter: 1.850 Inch
  • Ring Free Diameter Tolerance: +0.013/-0.015
  • Shaft Diameter: 2 Inch
  • Thickness: 0.062 Inch
  • Thickness Tolerance: +/-0.003
  • Type: Stamped,Standard Duty

    • *Photographs are representational and may not be size accurate