Roll over image to zoom in

3/8 Inch Plain Stainless Steel External Snap Ring

436.01.38

From cap screws to hitch pins, we are a master distributor for fasteners of all types. Available in inch and metric sizes, we are your single source solution. Additionally, we offer both domestic and imported options for most fastener types.

  • Allowable Corner Chamfers: 0.016 Inch
  • Allowable Corner Radii: 0.026 Inch
  • Clearance Diameter Released in Groove: 0.590 Inch
  • Edge Margin: 0.036 Inch
  • Finish: Plain
  • Gaging Diameter: 0.433 Inch
  • Groove Depth: 0.012 Inch
  • Groove Diameter: 0.352 Inch
  • Groove Diameter to Shaft Concentricity: 0.002 Inch
  • Groove Diameter Tolerance: +/-0.002
  • Groove Width: 0.029 Inch
  • Groove Width Tolerance: +0.003/-0.000
  • Hardness: HR30N 63-69.5
  • Hole Diameter: 0.041 Inch
  • Hole Diameter Tolerance: +0.010/-0.002
  • Item: External Snap Ring
  • Lug Height: 0.088 Inch
  • Lug Height Tolerance: +/-0.003
  • Material: Stainless Steel
  • Maximum Section: 0.050 Inch
  • Maximum Section Tolerance: +/-0.003
  • Measurement: Inch
  • Minimum Section: 0.031 Inch
  • Minimum Section Tolerance: +/-0.003
  • Radial Wall Thickness: 0.030 - 0.050 Inch
  • Ring Free Diameter: 0.338 Inch
  • Ring Free Diameter Tolerance: +0.002/-0.005
  • RPM Limits: 60000 RPM
  • Shaft Diameter: 3/8 Inch
  • Thickness: 0.025 Inch
  • Thickness Tolerance: +/-0.002
  • Type: Stamped,Standard Duty

    • *Photographs are representational and may not be size accurate