Roll over image to zoom in

1/4 Inch Passivated 15-7 Ph Stainless Steel E-Clip Retaining Ring

494.02.14

Circlips (also known as retaining rings) are types of fastener which look like flexible, open-ended rings. Circlips are typically made from stainless steel and similar metals. Alternative names for circlips include retaining rings, retaining clips, C-type, Jesus clips, snap rings, and E-type.

  • Allowable Corner Chamfers: 0.045 Inch
  • Allowable Corner Radii: 0.060 Inch
  • Application: E-clip
  • Clear Outside Diameter: 0.527 Inch
  • Clearance Diameter Released in Groove: 0.540 Inch
  • Edge Margin: 0.040 Inch
  • Finish: Passivated
  • Groove Depth: 0.020 Inch
  • Groove Diameter: 0.210 Inch
  • Groove Diameter to Shaft Concentricity: 0.004 Inch
  • Groove Width: 0.030 Inch
  • Groove Width Tolerance: +0.003/-0.000
  • Hardness: HR30N 63-69.5
  • Item: E-Clip
  • Material: 15-7 PH Stainless Steel
  • Measurement: Inch
  • Ring Free Diameter: 0.207 Inch
  • Ring Free Diameter Tolerance: +0.002/-0.003
  • RPM Limits: 25000 RPM
  • Shaft Diameter: 1/4 Inch
  • Thickness: 0.025 Inch
  • Thickness Tolerance: +/-0.002
  • Thrust Max Load: 255 lb
  • Type: Stamped
  • *Photographs are representational and may not be size accurate