Roll over image to zoom in

5/16 Inch Passivated 15-7 Ph Stainless Steel E-Clip Retaining Ring

494.02.516

Circlips (also known as retaining rings) are types of fastener which look like flexible, open-ended rings. Circlips are typically made from stainless steel and similar metals. Alternative names for circlips include retaining rings, retaining clips, C-type, Jesus clips, snap rings, and E-type.

  • Allowable Corner Chamfers: 0.045 Inch
  • Allowable Corner Radii: 0.060 Inch
  • Application: E-clip
  • Clear Outside Diameter: 0.500 Inch
  • Clearance Diameter Released in Groove: 0.520 Inch
  • Edge Margin: 0.062 Inch
  • Finish: Passivated
  • Groove Depth: 0.031 Inch
  • Groove Diameter: 0.250 Inch
  • Groove Diameter to Shaft Concentricity: 0.004 Inch
  • Groove Width: 0.030 Inch
  • Groove Width Tolerance: +0.003/-0.000
  • Hardness: HR30N 63-69.5
  • Item: E-Clip
  • Material: 15-7 PH Stainless Steel
  • Measurement: Inch
  • Ring Free Diameter: 0.243 Inch
  • Ring Free Diameter Tolerance: +0.002/-0.004
  • RPM Limits: 22000 RPM
  • Shaft Diameter: 5/16 Inch
  • Thickness: 0.025 Inch
  • Thickness Tolerance: +/-0.002
  • Thrust Max Load: 325 lb
  • Type: Special,Stamped

    • *Photographs are representational and may not be size accurate